Century EverRide Decal Pack of 10 - CB108-3517

UV DTF Transfer Stickers - (Magic Film)

Ultraviolet (UV) DTF (direct to film) Printing refers to a new printing method that uses ultraviolet curing technology to create designs on films. These designs can then be transferred onto hard and irregular-shaped objects by pressing down with fingers and then peeling off the film.

UV DTF printing is extremely versatile due to the type of surfaces the designs can go on, some include: metal, leather, wood, paper, plastic, ceramic, glass, etc. These transfers can even be applied onto irregular and curved surfaces!

PREPARATION
Ensure you are applying to a clean dry surface, void of any oils or dust
Clean the surface with a 95+% Alcohol product to ensure it’s clean

When preparing for transfer always peel the backing sheet away from the image (easiest with the image face down on a flat surface)

- Hold the image face down, keeping downward pressure on it. Then peel the backing away while also keeping downward pressure on the backing sheet.

- Place the decal in the position you want and rub it onto the surface. A vinyl applicator will help aid the adhesion of the print to your product.

- Once you have made sure the decal is fully adhered, peel back the carrier while being careful in any fine detail areas of the image.

- Do not pull the lamination film upward, use the same technique as above where you peel away while keeping downward pressure on the print.

Go slowly and do not rush. Allow 48 hours to set before use, and remember - hand wash only! Microwaves and dishwashers are a no-go!